Pre Amplifier for Electret Condenser Microphone

Pre Amplifier for Electret Condenser Microphone

Pre Amplifier for Electret Condenser Microphone


This schematic shows a pre amplifier to be used with Electret Condenser Microphone.


- BC650C can be replace with BC549C transistors.

- The 1kΩ resistor limits the current flowing through the microphone.

- 1kΩ must be replaced by a 2.2kΩ resistor if the supply voltage is above 12V. You can omit this component if you are using a dynamic microphone instead of electret condenser microphone.

Post a Comment

Please Select Embedded Mode To Show The Comment System.*

Previous Post Next Post